top of page
Depositphotos_93095260_xl-2015-1024x684.jpg.webp

The Biolimescaler®:
Additional limescale treatment device for very hard water (over 40°F, French degrees)

  • All mineralised water (including tap water) contains lime which, under the influence of heat, is converted into limescale. This initially appears in the form of aragonite (softer and more soluble lime) and eventually changes into calcite (hard and compact deposits which adhere and harden in the water pipes).

  • This limescale will settle around the resistance of the boiler (which heats the water up to a maximum of 55 ° C) and will calcify, which will reduce the energy efficiency, but it will also settle in the water pipes in the long term with the risk of them becoming clogged!

  • To prevent these problems, it's therefore advisable to treat this limescale by changing its mineralogical structure to make it more soluble, preventing it from adhering. The limescale thus remains in the water but no longer has any drawbacks.

  • Thanks to the permanent magnets and the generated magnetic fields, the Biodynamizer treats limescale for all tap water with a hardness of up to 40 ° f (French degree).

  • For tap water hardnesses above 40°F (very hard water), we therefore recommend installing an additional limescale treatment device, the Biolimescaler® (in addition to the Biodynamizer®). It treats limescale by preventing the mineralogical structure (in the form of aragonite) from changing into calcite, as well as the morphology of lime crystals (their size increases = early limescale formation). In addition, the Biolimescaler® helps eliminate existing deposits in the pipes.

  • The Biolimescaler® consists of 12 natural samarium-cobalt alloy magnets surrounded by food-grade Teflon, which produce an intense alternating magnetic field (NS/SN) of 10,000 Gauss (1 T). Result:

    • There is no more limescale on the inside of the water pipes

    • The old limescale disappears

    • The calcification that remains around the resistances and on the bottom of the boiler is significantly reduced

    • The Biolimescaler® requires no maintenance, no cleaning products, no electricity, no evacuation and is guaranteed for life!

New-ARA-incliné-sans-logo.png.webp

The benefits of the Biolimescaler®

  • Requires no maintenance and is guaranteed for life!

  • No electrical connection

  • Does not require salt or other chemicals

  • 100% ecological and good for the environment

  • Extends the lifespan of your installations

  • Treats limescale along the entire length of the building's water pipes (regardless of their length)

Technical data sheet of Biolimescaler®

Picto-garantee-a-vie-EN-205x300.png.webp

Technical features of Biolimescaler®:

  • Connections: diameter ¾ inch male (can be installed in either direction)

  • Dimensions: 60 x 135 mm

  • Weight: 1.7 kg

  • Capacity (flow): 60 liters/minute

  • Use only on the cold water circuit at max 35°C!

bottom of page